palmiye Skyroof Plus, Руководство по установке

Страница: 38 / 56

38
5.8.2.1. RGB LED Resetting
Press the programming button on the panel for 5 seconds, then press the programming
button on the back of the remote for 2 seconds.
5.9. Using of Remote Control:
5.9.1. Using of Lights
• “UP” button: It’s ensures Activate on your lighting system. When you press constantly “UP”
button, the LED lights will up through DIMMING feature.
• “DOWN” button: It’s ensures Passive on your lighting system. When you press constantly
“DOWN” button, the LED lights will down through DIMMING feature.
• “MY” button: adjust to favorite light intensity automatically.
5.9.2. Using of motors
• “UP” button: Opens the panels.
• “DOWN” button: Closes the panels.
• “MY” button: It stops the motor from running and ensures that the panels remain where
they are.
5.9.3. Transfer the channel on the current remote control to a different remote control.
Step 1: On the current remote, select which channel you want to transfer,
Step 2: On the current control, keep the “PROG” key pressed (LEDs will be turned on and off.)
Step 3: In the new remote, select which channel you want to choose,
Step 4: On the new remote, press and release the “PROG” button. (LEDs will be turned on and
off.)
5.9.4. Favorite lighting programming
Step 1: After reaching the desired light intensity, press “MY” button for 5 sec., (LED lights will
blink.) Thus, favorite light programmed.
5.9.5. Favorite lights resetting
Step 1: While in favorite lighting press “MY” button as 5 sec., the LED’s will blink two times.
Thus, favorite lights will be reset.