Version 1.1.4 dated 2015-3-30
Page 10
Original operating instructions
BF46 Vario | BF46TC
US
1.5
Possible dangers caused by the mill drill
The mill drill is state-of-the-art.
Nevertheless, there is a residual risk as the mill drill operates with
at high speeds,
with rotating parts and tools,
with electrical voltages and currents.
We have used construction resources and safety techniques to minimize the health risk to per-
sons resulting from these hazards.
If the mill drill is used and maintained by personnel who are not duly qualified, there may be a
risk resulting from incorrect or unsuitable maintenance of the mill drill.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must
be duly qualified,
strictly follow these operating instructions.
Always disconnect the mill drill from the electrical power supply when performing cleaning or
maintenance works.
WARNING!
The mill drill may only be used with functional safety devices.
Disconnect the mill drill immediately, whenever you detect a failure in the safety devices
or when they are not fitted!
All additional devices installed by the operator have to be equipped with the prescribed
safety devices.
This is your responsibility being the operating company!
"Safety devices“ on page 12
1.6
Qualification of personnel
1.6.1 Target group
This manual is addressed to
the operating companies,
the users,
the staff for maintenance works.
Therefore, the warning notes refer to both, operation and maintenance staff of the mill drill.
Disconnect the mill drill always from the electrical power supply. This will prevent it from being
used by unauthorized staff.
The qualifications of the staff for the different tasks are mentioned below:
Operator
The operator is instructed by the operating company about the assigned tasks and possible
risks in case of improper behaviour. Any tasks which need to be performed beyond the opera-
tion in the standard mode must only be performed by the operator if it is indicated in these
instructions and if the operating company expressively commissioned the operator.
Electrical specialist
Due to his professional training, knowledge and experience as well as his knowledge of respec-
tive standards and regulations the electrical specialist is able to perform works on the electrical
system and to recognise and avoid any possible dangers himself.
