7
Preparing the Lmic for use
The rechargeable 9v PP3 battery for the Lmic is supplied installed within the hand
control unit and will normally have only a nominal charge.
The battery will need charging either overnight (for up to 7 hours) to achieve full
charge before being ready to use.
Charging the Lmic batteries
Connect the charger lead to the rear connector of the Lmic and connect the charger
power lead to the 240V AC supply. The Lmic can then be charged overnight. An
optional accessory is the car cigarette lighter adapter that can also be used to
charge the batteries.
Battery replacement
Although these batteries are rechargeable they may eventually need to be replaced.
To do this, undo the two screws underneath the hand-held unit and separate the two
halves of the Lmic unit. Gently pull out the battery holder and replace the batteries.
When refitting the batteries and battery holder make sure no wires become trapped.
The Lmic connected to the universal 110-
240V AC charger
