17
Product Regulatory Information
FCC Statement
This device complies with part 15 of the
FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
The use of shielded I/O cables is required when connecting this
equipment to any and all optional peripheral or host devices.
Failure to do so may violate FCC rules.
IMPORTANT: Changes or modifications not covered in this
manual must be approved in writing by the manufacturer’s
Regulatory Engineering Department. Changes or modifications
made without written approval may void the user’s authority to
operate this equipment.
0
Static Electricity, ESD, and Your Palm
®
Wi-Fi Card
Electrostatic discharge (ESD) can cause damage to electronic
devices if discharged into the device, so you should take steps to
avoid such an occurrence.
Description of ESD
Static electricity is an electrical charge
caused by the buildup
of excess electrons on the surface of a
material. To most people, static electricity and ESD are nothing
more than annoyances. For example, after walking over a carpet
while scuffing your feet, building up electrons on your body, you
may get a shock—the discharge event—when you touch a metal
doorknob. This little shock discharges the built-up static
electricity.
Palm
®
Wi-Fi card
Tested to Comply
With FCC Standards
FOR HOME OR OFFICE USE
Responsible Party:
Palm, Inc.
950 W. Maude Ave.
Sunnyvale, California 94085-2801
United States of America
(408) 617-7000
FCC
