Palm PalmModem, Руководство пользователя

Страница: 9 / 26

Chapter 2 Page 5
Chapter 2
Setting Up Your
PalmModem
®
Connectivity Kit
Before you use your PalmModem
®
connectivity kit, you must:
■
Install the batteries
■
Configure your computer
■
Configure your handheld
You might also want to install appplications, such as e-mail, on your
handheld.
Installing the batteries
To use your modem, you must first
install two AAA alkaline batteries.
The batteries fit in the compartment
behind the battery door on the back
of the modem. Make sure to click
the door into place after installing
the batteries.
Note: A diagram in the interior of
the battery compartment
shows the orientation of the
positive (+) and negative (-)
ends of the batteries. When
correctly installed, the clips
in the battery compartment
secure the batteries in place.
Replacing batteries
Under normal conditions, the AAA batteries provide approximately
two and a half hours of continuous use. When your modem has
approximately 15% of battery life remaining it will sound three short
beeps, which repeat every five minutes until the batteries are drained.
Replace the batteries as soon as possible.