Casio CASSIOPEIA IT-2000D User Manual Download

Page: 1 / 56

Data Collector
Colector de Datos
Datenerfassungsgerät
Collecteur de Données

User’s Guide
Guía del usuario
Bedienungsanleitung
Mode d’emploi

• Congratulations upon your selection of

the CASIO IT-2000 Data Collector.

• Be sure to familiarize yourself with the

basic operations described in this
manual before actually trying to
operate the Data Collector.

• Enhorabuena por la selección del

colector de datos IT-2000 CASIO.

• Antes de intentar utilizar este colector

de datos, familiarícese con las
operaciones básicas descritas en este
manual.

• Mit dem Datenerfassungsgerät CASIO

IT-2000 haben Sie eine gute Wahl
getroffen.

• Bitte machen Sie sich mit den in

diesem Handbuch beschriebenen
Grundfunktionen vertraut, bevor Sie
beginnen, mit dem
Datenerfassungsgerät zu arbeiten.

• Nous vous remercions d’avoir choisi le

Collecteur de Données Casio IT-2000.

• Veuillez vous familiariser avec les

démarches de base, décrites dans ce
manuel, avant d’essayer d’utiliser le
Collecteur de Données.

Imprimé au Japon

Printed in Japan

AB9906-0003501A

Printed on recycled paper.
Imprimé sur papier recyclé.
Gedruckt auf wiederverwertetem Papier.

Summary of Contents for CASSIOPEIA IT-2000D

























































Search results

Summary of Contents for CASSIOPEIA IT-2000D

Reviews:

Related manuals for CASSIOPEIA IT-2000D

Brands by name

Popular brands

Casio CASSIOPEIA IT-2000D, User Manual

Search results

Summary of Contents for CASSIOPEIA IT-2000D

Reviews:

Related manuals for CASSIOPEIA IT-2000D

Brands by name

Popular brands