Palm Centro 690, Руководство пользователя

Страница: 17 / 100

S E T T I N G U P
C H A R G I N G T H E B A T T E R Y 11
1
CH
AP
T
E
R
IMPORTANT
Use the battery that came
with your Centro 690. Do not use a battery
from another Centro model in your
Centro 690. Similarly, do
not use the
Centro 690 battery in another Centro
model. Using a battery that is designed for
another Centro model can damage your
Centro 690. For info on replacement
batteries, see Replacing the battery.
NOTE
Unauthorized batteries will not
power your Centro. Only a Palm approved
battery will wake up and power your
Centro. If your Centro does not turn on,
check to see whether an unauthorized
battery has been inserted in your Centro.
8 Slide the battery door onto the back of
the Centro 690 until it clicks into place.
9 Your Centro screen wakes up and
begins the setup process. When the
language selection screen appears,
select the language you want to use,
and then follow the onscreen
instructions to set up your Centro.
IMPORTANT
Always use the same
language for your Centro, your computer
operating system, and your desktop
synchronization software. Otherwise, you
may lose information or have difficulty with
synchronization. Support is not provided for
mismatched language setups.
NOTE
If the correct battery is inserted and
your Centro still does not turn on, you need
to connect it to the AC charger. Make sure
the AC charger is plugged in to a wall
outlet. If your Centro still does not turn on
after being connected to the AC charger for
five minutes, do a soft reset. See
Performing a soft reset.
Charging the battery
The battery comes with a sufficient charge
to complete the setup process and activate
your phone. After activation, we
recommend charging your Centro 690 for
three hours (or until the indicator light is
TIP
The power-saving feature turns off the
Centro screen after a period of inactivity. To
wake up the screen, press and release
Power/End, and then press Center on the
5-way to turn off Keyguard .