Palm
®
ultralight wireless headset
15
Using your headset
Using your headset
Your headset uses a digital signal processor (DSP) to reduce background noise.
By default, DSP noise reduction is on. However, if you want to enable the power-
saving mode by turning off DSP noise reduction, simultaneously press both sides
of the
Volume
button
before
you make a call. Press the button until you hear two
descending tones. To reenable DSP noise reduction, repeat the procedure for
turning off DSP noise reduction and you should hear two ascending tones.
When you turn off your headset, the DSP noise reduction setting is cleared. DSP
noise reduction is reenabled the next time you turn it on.
If you press both sides of the Volume button at the same time
while
on a call
, you activate the mute setting, which mutes your voice to the other
person.
For your comfort, health, and safety, do not exceed moderate
volume levels.
Volume
button
NOTE
[ * ]
IMPORTANT
[ ! ]
