-
4
Illustration
Î
Release and remove the suction head.
Î
Remove the membrane filter.
Î
Insert and lock the suction head.
–
To vacuum wet dirt, always remove the
membrane filter (option).
몇
Warning
The flat pleated filter must must always be
in place while vacuuming.
–
If wet dirt is vacuumed with the uphol-
stery or crevice nozzle, or if water is
sucked up from a container, it is recom-
mended to deactivate the "automatic fil-
ter cleaning" function.
–
If the maximum liquid level is reached
the appliance will turn off automatically.
–
In case of non-conductive liquids
(such as emulsion drilling fluids,
oils, and greases) the appliance is
not turned off when the container is
full. The filling level must be continu-
ously monitored and the container
must be emptied in time.
–
After the wet vacuuming: Clean the flat
folded filter with the filter cleaning.
Clean the electrodes with a brush.
Clean the container with a damp rag
and dry it.
Illustration
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.
Î
Plug in the main plug.
Î
Switch on the appliance at the main
switch.
Î
Set the suction output (min - max) at the
rotary switch.
Danger
Risk of injury and damage! The socket out-
let is only for the connection of power tools
to the vacuum cleaner. Any other use of the
socket outlet is not permitted.
Î
Connect the mains plug of the electric
power tool to the vacuum cleaner.
Î
Switch on the appliance at the main
switch.
Indicator lamp is on; vacuum cleaner is in the
standby mode.
Note:
The vacuum cleaner is turned on and
off automatically with the electric power tool.
Note:
The vacuum cleaner starts automat-
ically within 0.5 seconds and continues to
run for 15 seconds after the power tool has
being switched off.
Note:
Please refer to "Technical specifica-
tions" for the power connection specifica-
tions of the power tools.
Illustration
Î
Adjust the stepped power tool adaptor to fit
the connection of the electric power tool.
Illustration
Î
Remove the elbow from the suction hose.
Î
Attach the stepped power tool adaptor to
the suction hose.
Illustration
Î
Connect the adaptor to the electric pow-
er tool.
Note:
The different suction hose sections are
required to allow an adjustment to the con-
nection sections of the processing tools.
Î
Set the minimum volume flow for the
suction hose cross section at the rotary
switch.
The scale displays the suction hose cross
section.
Note:
To use the appliance as dedusting
device for the mobile operation (processing
tool connected to the vacuum cleaner) the
built-in monitoring must be adjusted to the
connected processing tool (dust-generat-
ing device). This means that the user must
be warned if the minimum volume flow of
20 m/s that is required for the suction is fall-
en short of.
Note:
Please refer to the type plate for the
specification of the minimum volume flow in
dependence on the negative pressure.
Remove the membrane filter.
General
Clip connection
Operation
Turning on the Appliance
Adjust the suction output
Working with electrical power tools
19
EN
Содержание Dust M
