Pall WS08 Series, Инструкция пользователя

Страница: 25 / 30

Pall WS08 Series
Water Sensor
i n s t r u c t i o n b o o k l e t
25
5.6 Information
Here you will find information on the selected transmitter.
Serial number: Used to track the manufacturing data of
the transmitter.
Network address: Each transmitter is assigned a unique network
address at the factory for precise identification.
Type: Name of the transmitter series.
Humidity
Calibration Date:
Provides information on the date of the last
humidity calibration, but only if the configuration
software was used.
Note: Calibrations performed directly on the circuit board are
not recorded!
Temperature
Calibration Date:
Provides information on the date of the last
temperature calibration, but only if the
configuration software was used.
Note: Calibrations performed directly on the circuit board are
not recorded!
Firmware /
Version:
Provides information on the software version
implemented in the transmitter (internal).
Configuration software
5.5 Parameter
Moisture content:
Enter the parameter C1, C2, C3 and C4 for calculation of the water
content x [ppm].
Note: The saturation content is PPM (parts per million) can be displayed if
the proper C1, C2, C3, & C4 constants have been loaded. It is important
to point out the constants vary for each oil manufacturer and oil type.
The user is cautioned not to experiment by entering arbitrary constants
since this will result in an inaccurate displayed PPM valve.
Contact your local Pall Corporation representative for more details.
Air pressure:
If a transmitter of the WS08 series is operated far above sea level or a
measurement is required at high process pressure, the prevailing ambient
pressure can be entered to increase the accuracy of the derived values /
computing funtions.
AB