7
6
4. Press and
hold
the
Program
button to display the current timer setting. Adjust
time (minutes) using the
Increase
or
Decrease
buttons while simultaneously
holding the
Program
button until “060” minutes is reached. Release buttons.
Timer is now programmed for 60 minute interval operation.
5. Press
Start/Stop
button to run shaker program. Shaker will shut off
automatically after time has expired.
Display:
During operation the display lamp will flash.
• To view the current speed during operation press
Speed Selector
button.
• To view time remaining during a timed operation press
Timer Selector
button.
NOTE:
If power is turned off using the Power Switch during operation (in both
continuous and timed modes), the shaker will run immediately after power up. Use
Start/Stop
button to end a timed program or to stop shaking in continuous mode.
Timed Operation Example:
If, the desired shaking speed is 450 undulations (cycles) per minute (U/min.) for an
interval of 60 minutes, follow the steps outlined below:
1. Press the
Speed Selector
button to access the speed mode. The Speed Mode
Lamp will light and the display will read “000”.
2. Press and
hold
the
Program
button to display the current speed setting. Adjust
speed using the
Increase
or
Decrease
buttons while simultaneously holding the
Program
button until 450 is reached. Release buttons. Speed is now adjusted
to desired setting.
3. Press the
Timer Selector
button to access the timer mode. The Timer Mode
Lamp will light and the display will read “000”.
Instructions for Use
(continued)
Instructions for Use
(continued)
U/min
ST
AR
T
STOP
U/min
ST
AR
T
STOP
U/min
ST
AR
T
STOP
U/min
ST
AR
T
STOP
1240_87333C.qxd:1240_87333C.qxd 7/23/08 5:31 PM Page 9
