26
BIOS Setup
Suspend Mode (S3 (STR))
Use this item to define how your system suspends. In the default, S3 (STR), the suspend
mode is a suspend to RAM, i.e., the system shuts down with the exception of a refresh
current to the system memory.
USB Wakeup From S3 (Disabled)
This item allows users to enable or disable the USB device Walk-up the system from S3
mode.
This option lets you control system power management.
Item Help
Suspend mode
Report Video on S3 Resume
USB Wakeup From S3
Restore on AC Power Loss
Soft-Off by PBTN
PS2 Keyboard Wakeup From S3
PS2 Mouse Wakeup From S3
Resume On Ring
Resume On LAN
Resume On PME#
Resume On RTC Alarm
[No]
[Disabled]
[Power Off]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
6. Power Management Setup
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
Power Management Setup
F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
mnlk
Restore on AC Power Loss (Power Off)
This option lets you tell the PC what to do in the event of a power loss.
Soft-Off by PWR-BTTN (Instant-Off)
Under ACPI (Advanced Configuration and Power management Interface) you can create a
software power down. In a software power down, the system can be resumed by Wake Up
Alarms. This item lets you install a software power down that is controlled by the power
button on your system. If the item is set to Instant-Off, then the power button causes a
software power down. If the item is set to Delay 4 Sec. then you have to hold the power
button down for four seconds to cause a software power down.
PS2 Keyboard/Mouse Wakeup From S3 (Disabled)
This item specifies whether the system will be awakened from power saving modes by
PS2 Keyboard or Mouse.
Resume by Ring (Disabled)
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the
modem) awakens the system from a soft off state.
[S3 (STR)]
Select the ACPI
state used for
System Suspend.
