004732026 - 13/05/2022 33
ENGLISH
The manufacturer declines all responsibility for any varia-
tions in the characteristics of the material constituting the
floor under the protection.
Provide an accessible technical space for any
maintenance.
Please remember to respect the minimum distance from
flammable materials stated on the id plate of the tubes
used to manufacture the fireplace.
6 INSTALLATION
6.1 General considerations
In the following sections some indications are provided to
be complied with in order to obtain the maximum perfor
-
mance from the purchased product.
The following indications are however subject to
compliance with any possible national, regional
and municipal laws and regulations in force in the
country where the appliance is installed.
6.2 Assembly diagram
Representation of assembly diagram.
A)
Chimney flue
B)
External air intake
C)
Heat recovery grate
D)
Counter-hood and fireproof load-bearing structure
E)
Flue gas duct
F)
Thermal insulation on combustible materials
G)
Air recirculation grate
H)
Distance min. 5 mm between cladding and Patio
20mm
A
E
B
C
H
F
G
D
Product images are for illustrative purposes only
