26
004778431 - 18/09/2020
5.3.2 Refractory removal
mX 64 models
1) Loosen the screws (A) and remove the refrac-
tory block bracket (
B
A
Fig. 17
2) Remove the side refractory being careful not
to damage it (
Fig. 18).
Fig. 18
3) Proceed in the same way on the opposite side
(in the
mX R and mX l models the dimensions
of the refractory and the relative fixing brack-
et are reduced due to the presence of the side
glass).
4) Loosen the screws (c) and remove the refrac-
tory block bracket (
D) (Fig. 19).
D
C
Fig. 19
5) Extract the refractory backrest (E) pushing it
upwards paying attention to the bracket (
F)
(
Fig. 20).
E
F
Fig. 20
