Palax C900, Инструкция по эксплуатации

Страница: 12 / 37

12 1-2017
Translation
Remember that as the operator you are responsible for any injuries caused if safety-
related devices have been removed from the machine.
1.10 Operating conditions
Always place the machine on as level a surface as possible.
Prevent risks, such as slipping in winter, by organising the work site in a due manner.
Otherwise the weather conditions do not set any restrictions on the operation. When
starting the machine in severe frost, allow it to idle at about 1/4 of the maximum speed
for about 5 to 10 minutes.
Only operate the machine in an adequately lit space.
It is recommended that a suitable stand be purchased or made that enables the trees
to be processed where the logs are ready at the level of the in-feed deck. Hence, un-
necessary lifting may be avoided and the work can proceed much faster. We recom-
mend using either the Palax Mega log-deck or the Palax Log log-stand.
The most suitable temperature range for operation is approximately - 20 to +30 de-
grees Centigrade. Otherwise, the weather conditions do not set any restrictions on the
operation.
Make sure that no other people, especially children, are present inside the operating
range.
Never use the machine indoors, owing to the risk of dust generation or the danger of
exhaust gases.
1.11 Terms of warranty
The warranty period runs for 12 months from the date of purchase.
The warranty covers:
Parts which have been damaged during normal operation of the machine due to any
defects in material or workmanship.
The reasonable repair cost as set forth in the agreement between the buyer and the
manufacturer.
A new part is delivered as a replacement for the defective one.
The warranty does not cover:
Defects due to normal wear, faulty operation or negligent maintenance.
The crosscut saw-blade, the in-feed belt, the V-belts and oils.
Defects in the machine due to any modifications which the buyer has made or ordered
from a third party and which have affected the machine in such a way that it can no
longer be considered to correspond to its original configuration.
Other possible expenses or financial claims due to the above-mentioned
measures.
Indirect expenses and/or travel costs incurred while making repairs under warranty.
For parts changed during the warranty period, the warranty expires at the same time as
the warranty period of the machine.
Consult your dealer about matters related to the warranty.
1.12 Operating instructions for the winch
Please refer to the user manual of the winch or visit our website at www.palax.fi for more
detailed operating instructions for the winch.