Palas AQ Guard Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 90

Palas AQ Guard Скачать руководство пользователя страница 8

2

For your safety

8

6062-en_V2.4_02/21

2.2

Safety notes on using the built-in LTE
dongle

If the built-in LTE dongle (HUAWEI 3372h-320) is equipped with a SIM card
and the “Connectivity Package” is enabled, additional safety measures are
required.

Comply with the following safety notes if the dongle has been activated and
is transmitting signals via a mobile network. The safety notes are an extract
from the manufacturer’s safety information, version: November 2020.

Additional detailed information can be found on the manufacturer’s website

https://consumer.huawei.com/de/support/smart-home/e3372/

Frequency bands and output

Frequency bands in which the radio device operates: Some bands may not
be available in every country or region. Consult your local network provider
for details.

Maximum high frequency current transmitted in the frequency bands for
operation of the radio device: The maximum current for all bands is below
the limit indicated in the respective harmonized standard.

The following nominal limits apply to the frequency band and (radiated and/
or cable) transmission: GSM 900: 37 dBm, GSM 1800: 34 dBm, WCDMA
900/2100: 25.7 dBm, LTE band 1/3/7/8/20/28: 25.7 dBm.

Using mobile communication

Use the device only where permitted! Do use the device if it could impact
electronic equipment or potentially cause other hazards.

Interference with medical equipment

• Comply with all rules and regulations of the hospitals and health care

facilities! Do not use the device in areas where it is prohibited.

• Some wireless devices can disrupt proper functioning of hearing aids or

pacemakers. Consult the manufacturer of the medical device for further
information.

• Pacemaker manufacturers recommend maintaining a minimum distance

of at least 20 cm between the device and a pacemaker to prevent
potential interference with the pacemaker.

«
...
6
7
8
9
10
...
»

Содержание AQ Guard



























































































Отзывы:

Нет отзывов