15
51-4180
INSTALLATION
FIGURE #3
CYLINDER SHACKLE
36-LINK CHAIN
26-LINK CHAIN
BRUSH HEAD
UPRIGHT
MANUAL ANGLE KIT
ELECTRIC LIFT INSTALLATION
IMPORTANT: Not all sweepers include electric lift and some units include a bracket for
mounting the lift switch. If your unit is equipped with an electric lift and a mounting bracket,
refer to the instructions included with your mounting assembly to install the bracket.
To install the electric switch onto the prime mover dash:
1.
Locate a convenient area on the prime mover dash to mount the lift switch. Disconnect
the battery.
FOR UNITS WITH ELECTRIC LIFT:
Refer to the instructions included with your mounting assembly.
1.
Connect a spring to one end of each 7-link chain.
2.
Connect the springs to the holes in the swing assembly upright and the chains to the
outside slots on the brush head upright.
3.
Install cable through the center hole in the brush head upright. Loop the loose end
around and secure it with a cable clamp. Attach the other end of the cable through the
center hole in the swing assembly upright. Loop the loose end around and secure it with
a cable clamp.
4.
Refer to “LEVELING”
DANGER! BATTERY ACID CAUSES SEVERE BURNS. Batteries contain sulfuric acid.
Avoid contact with skin, eyes or clothing.
Antidote: EXTERNAL - flush with water. INTERNAL - drink large quantities
of water or milk. Follow with milk of magnesia, beaten eggs or vegetable
oil. Call physician immediately. EYES - flush with water for 15 minutes and
get prompt medical attention.
WARNING! When working around batteries, remember that all of the exposed metal
parts are “live”. Never lay a metal object across the terminals because a
spark or short circuit may result.
