Pakedge WA-2200 Series, Быстрый старт

Страница: 6 / 10

6 6
Logging in to the access point
To log in to the access point:
1
Connect the access point to your PoE switch with an Ethernet cable.
2 Log in to your Pakedge router to find the IP address assigned to the access point
under the DHCP Client Table .
Tip: If you do not have a router in your network that distributes IP addresses, you
can try to access the access point through its default IP address of
192.168.1.21
.
3
Enter that IP address into a web browser to open the access point interface. The
Sign In page opens.
Note:
Because the AP uses self-signed certificates for secure connection to the
web browser, a security message will appear. There is no risk in proceeding to the
AP’s web interface, and communications will remain secure.
4 In the username box, type admin . In the password box, type password , then click
Sign In
. The first time you log in, the Configure page opens.