8
9
8
9
Adding more WA Series APs to the BakPak site
To manage and set up more than one WA-2200, a BakPak site must be created to
manage them as a group.
To create a BakPak site:
1
Log in to your BakPak account, then click
Add Site
to create a site.
2
In the
Management Agent
list, select the first WA-2200, complete the site
information, then click
OK
.
The site is created, and the WA-2200 will act as the “master AP” for adding more
WA Series APs to the site.
Adding WA Series APs to the site
To add APs and provision them with the existing configuration:
1
Make sure that the first AP is already configured, and that the additional APs are
turned on for at least five minutes and connected to your network.
2
In BakPak, select the new WA-2200 site, then click
Device Discovery
.
Any additional WA Series APs are discovered and appear as tiles that can be
selected (already selected by default).
3
Click
OK
. The APs are added to the site.
4
To apply the first AP’s settings to the new APs, in the BakPak site select the first
AP you set up (on the previous page), then complete the site information and
click
Save & Apply Multiple
at the bottom. The settings are copied to the APs.
