PowerPak Power Distribution Unit
11
3.
Select
Use the following IP Address
and type the IP address and subnet mask, as in the example
below. Be sure the IP address and subnet mask are on the same subnet as the PowerPak. If the
PowerPak has been connected directly to a network with an active router, then it will be assigned an IP
address from the DHCP server instead of using the default 192.168.1.210 address.
Note:
Make sure the
PowerPak and your computer are configured on the same subnet.
PowerPak IP address:
192.168.1.210
PC IP address:
192.168.1.10
PC subnet mask:
55.255.255.0
4.
To configure the PowerPak through a web browser, type the IP address of the PowerPak (default
192.168.1.210
) and press
Enter
.
Default settings:
The IP address will be automatically assigned by a router if a DHCP server is
detected. Otherwise, the default IP address will be automatically set to
192.168.1.210
.
To log in:
1.
For
Username,
type
pakedge
. For
Password
, type
pakedgep
, then click
Log in
.
