Pakedge Device & Software W7 SERIES, Руководство пользователя, Страница: 44 / 57

W7x User Manual
44
o
If you select Allow MAC in the List , only clients whose MAC addresses are on the list in the table
will be able to access the network; other clients will be blocked.
o
If you select Deny MAC in the List , clients whose MAC addresses are on the list will be unable to
access the network; but all other clients will be granted access.

MAC Address: In the text boxes, type a client’s MAC address, then click Apply to add the client to the list.

The table at the bottom of the dialogue lists the MAC address you have blocked or allowed. To delete
selected MAC addresses or delete all the addresses in the table, select the address (es) in the list and click
Delete .

Click Apply to save your changes.
ADVANCED
You can configure the performance of your wireless network by changing the Data Rate, Transmit Power, and
RTS/CTS Threshold.
CLIENT LIST
The Client List menu appears only when the W7x is operating under Access Point mode or repeater mode. This
menu will show all the devices connected to the W7x. From the Client List , you can click on “Block” and this will
prevent the device from connecting.
NOTE: If you want to block a device from connecting on both the 2.4GHz and 5GHz band, then you must click on
“Block” under both the 2.4GHz and 5GHz client list.