Pakedge Device & Software W7 SERIES Скачать руководство пользователя страница 21

Страница: 21 / 57

W7x User Manual



Click “

Apply”

to save your changes.

NOTE:

For any changes to take effect, you must click the “

Save Changes

” button on the lower left below the menu.

This will reboot the access point, applying the configuration changes.

NETWORK

On the W7x main menu, the

Network

group has three options:



LAN Settings



Spanning Tree Settings



SNMP Settings

LAN SETTINGS

To configure the IP address of your W7x, in the Network section of the W7x main menu, click “

LAN

Settings”

. In the LAN Settings page, you can configure the W7x with a static IP address, or obtain an IP address

automatically using a DHCP client.



Network Setting

: If your W7x is connected to a DHCP server (such as a router), choose “

Obtain an IP

address automatically”.

Your W7x will be assigned an IP address from the DHCP pool (

Not

recommended



Specify an IP address (default):

Select this option if you want to use a static IP address. Type the

appropriate entries in the text boxes for

IP Address

IP Subnet Mask

Default Gateway, Primary

and

Secondary DNS



Click “

Accept”

to apply the changes.

Содержание W7 SERIES

























































Результаты поиска

Содержание W7 SERIES

Отзывы:

Pakedge Device & Software W7 SERIES, Руководство пользователя, Страница: 21 / 57

Результаты поиска

Содержание W7 SERIES

Отзывы: