LED and Interface Descriptions
FRONT OF ROUTER
LED
Status
Operation
Power
Green
The router is powered on.
Off
The router is turned off.
Status
Green
On during start-up or reboot.
Off
Normal operation.
HA
Green
Unit is being used in an HA cluster.
Ports 1 - 7
LINK/ACT
Green
Port is online (link established).
Flashing Green
Activity
SPEED
Green
Connected at 1000 Mbps.
Amber
Connected at 10/100 Mbps.
Off
Not connected.
WAN1,WAN2,
DMZ
LINK/ACT
Green
Port is online (link established).
Flashing Green
Activity
SPEED
Amber
Connected at 10/100 Mbps.
Off
Not connected.
BACK OF ROUTER
Interface
Type
Speed
Protocol Description
USB Management USB mini-B
USB
Client port for management
Console
RJ-45
9600 bps
RS-232 serial Optional connection to the management
computer. Provides access to the command
line interface (CLI).
USB
USB A
USB
Optional connection for FortiUSB key, modem,
or firmware backup and installation.
DMZ
RJ-45
10/100/1000 Ethernet
Optional connection to a DMZ network
WAN1 and WAN 2 RJ-45
10/100/1000 Ethernet
Redundant connections to the Internet.
Internal
RJ-45
10/100/1000 Ethernet
7-port switch connections on the internal
network.
Reset
NA
NA
NA
Resets router to factory defaults.
Planning Your Network
The Pakedge R60D router is preconfigured to support 5 virtual local area
networks (VLANs), each with a different priority level (see example above).
Pakedge has a full line of 802.1q (VLAN-capable) wireless access points.
Please contact Pakedge for more information.
Troubleshooting & Support
If you are unable to get the K60D/K60DUTM functional using these steps,
you can refer to the full manual on our website or contact the Technical
Support team for help.
CONTACT INFORMATION:
Website:
www.pakedge.com
Email:
Phone: (
650)385-8703
CUSTOMER SERVICE
Email:
Phone: (
650)385-8701
© Pakedge Device & Software Inc. 2014 – All Rights Reserved
K60D/ K60DUTM
pakedge
device&software
inc
.
Quick Start Guide
K60D: Gigabit preconfigured enterprise-class router—multi VLAN
K60DUTM: Gigabit preconfigured enterprise-class router with
preloaded network protection-multi VLAN
Package Contents:
R60D
– Audio/video bridging router
BR6-03
- Rack mount bracket
Power Supply AC/DC
(for R60D)
Power Cable
(US, EUR, UK, AUS/NZ, IT or IN/SA)
USB Management Cable
6ft CAT5E Cable
(WAN 1 port to internet connection)
Quick Start Guide
Pakedge Factory Default Settings for K60D / K60DUTM
R60D Username and Password
pakedge / pakedgef
Network Internal Interface (VLAN1)
192.168.1.99 (Router’s Default IP Address)
VLAN2
192.168.2.1
VLAN3
192.168.3.1
VLAN4
192.168.4.1
VLAN5
192.168.5.1
VLAN6 (Guest Network)
192.168.6.1
DHCP
WAN1 Interface
Dynamic IP Service
WAN2 Interface
Dynamic IP Service
DHCP Server on Internal Interface (VLAN1)
192.168.1.110 to 192.168.1.199
DHCP VLAN2
192.168.2.110 to 192.168.2.199
DHCP VLAN3
192.168.3.110 to 192.168.3.199
DHCP VLAN4
192.168.4.110 to 192.168.4.199
DHCP VLAN5
192.168.5.110 to 192.168.5.199
DHCP VLAN6 (Guest Network)
192.168.6.110 to 192.168.6.199
FCC Declaration of Conformity
Pakedge Device & Software, 3847 Breakwater Avenue Hayward, CA 94545 declares under sole responsibility that the
K60D/K60DUTM complies with 47 CFR Parts 2 and 15 of the FCC Rules as a Class B digital device. This device complies with Part
15 of FCC Rules. Operation of the device is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference that may cause undesired operation.
