POWER Finder 4G by PAJ GPS V.1.0 US
© PAJ GPS Inc.
6
1.3
Loading
Before using it for the first time, you should charge the GPS
tracker for about 12 hours. To do this, connect the charging
cable to the battery connection of the GPS tracker and connect
it to a USB wall plug adapter. The battery indicator goes out after
a while. To check whether the GPS tracker is fully charged, press
the button for the battery indicator. As soon as all four bars are
fully lit and none are flashing, the GPS tracker is fully charged.
The POWER Finder 4G offers, with an active tracking duration
of approx. 1 hour per day, a battery life of approx. 40 days
without intermediate charging! However, it should be noted
that the runtime depends on the load. The more the POWER
Finder 4G is moved by PAJ and the more alarms are sent, the
higher the utilization.
1.4
How do I activate the FINDER?
In order to be able to use the PAJ GPS FINDER, it is necessary to
first activate the device online.
Note: To activate the device you need the ID of your FINDER.
These can be found on the barcode stuck on the device.
Please follow
www.finder-portal.us/go
for activation.
1.5
Turning on/off
Recommended first step: To receive the best GPS signal
place the POWER Finder 4G outside and make sure it is not
covered. Avoid garages, basements and similar.
