PairGain T1L2PY0AA Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 80

PairGain T1L2PY0AA Скачать руководство пользователя страница 2

150-231-181-01, Revision 01

ii

September 7, 1999

HLU-231 List 8A

Revision History of This Practice

© Copyright 1999 PairGain Technologies, Inc.

PairGain and HiGain are registered trademarks of PairGain Technologies, Inc. All other product names mentioned in this practice
are used for identification purposes only and may be trademarks or registered trademarks of their respective companies.

Information contained in this document is company private to PairGain Technologies, Inc., and shall not be modified, used, copied,
reproduced or disclosed in whole or in part without the written consent of PairGain.

Information furnished by PairGain Technologies is believed to be accurate and reliable. However, no responsibility is assumed by
PairGain Technologies for its use; nor for any infringement of patents or other rights of third parties which may result from its use.
No license is granted by implication or otherwise under any patent or patent rights of PairGain Technologies. PairGain
Technologies reserves the right to change specifications at any time without notice.

Revision

Release Date

Revisions Made

01

September 7, 1999

Initial release

«
1
2
3
4
...
»

Содержание T1L2PY0AA

















































































Отзывы:

Нет отзывов