manualshive.com logo in svg

PairGain T1L2BZ0A, Руководство пользователя, Страница: 2 / 76

Поделиться
Скачать
PairGain T1L2BZ0A Скачать руководство пользователя страница 2

 150-231-184-05, Revision 05

ii

October 25, 1999

 HLU-231 List 8D

Revision History of This Practice

© Copyright 1999 PairGain Technologies, Inc.

PairGain and HiGain are registered trademarks of PairGain Technologies, Inc. All other product names mentioned in this practice 
are used for identification purposes only and may be trademarks or registered trademarks of their respective companies.

Information contained in this document is company private to PairGain Technologies, Inc., and shall not be modified, used, copied, 
reproduced or disclosed in whole or in part without the written consent of PairGain.

Information furnished by PairGain Technologies is believed to be accurate and reliable. However, no responsibility is assumed by 
PairGain Technologies for its use, nor for any infringement of patents or other rights of third parties which may result from its use. 
No license is granted by implication or otherwise under any patent or patent rights of PairGain Technologies. PairGain 
Technologies reserves the right to change specifications at any time without notice.

Revision

Release Date

Revisions Made

01

October 3, 1997

Initial release

02

June 10, 1998

Modified alarm diagnostics, miscellaneous edits

03

April 22, 1999

New diagnostic messages added

04

June 22, 1999

Firmware enhancements, addition of troubleshooting screens

05

October 25, 1999

Removed SPLB provisioning option, changed LNCD default to B8ZS, and 
added two troubleshooting screens. Changed CLEI code from 
T1L2BZ0AAB to T1L2BZ0AAC.

Содержание T1L2BZ0A













































































Отзывы:

Нет отзывов