Section 150-431-114
Release 01
Page 27
TABLE 8. HLU-431, LIST 1D STATUS MENU MESSAGES (CONTINUED)
Message
Full Name
Description
LOOPBACKS:
SMJK
Smart-Jack Loopback
The loopback at HRU-412 (remote) toward network (see Figure 6)
initiated by either the (2 in 5) in-band loopback code or the out-of-
band ESF data link loopback code.
NREM
Network Remote Loopback
The loopback at HRU-412 (remote) toward network (see Figure 6)
initiated from CO (network) by either the Intelligent Line Repeater
(ILR) number 2 code, the HLU-431 front panel Manual Loopback
push buttons, the HRU-412 front panel push button, or the
maintenance terminal.
NLOC
Network Local Loopback
The loopback at HLU-431, List 1D (local) toward network (see
Figure 6) initiated from CO (network) by either the Intelligent Office
Repeater (IOR) code, the HLU-431 front panel Manual Loopback
push buttons, or the maintenance terminal.
CLOC
Customer Local Loopback
The loopback at HRU-412 (local) toward CI (see Figure 6) initiated
from CPE (customer) by either the ILR number 2 code, the HLU-431
front panel Manual Loopback push buttons, or the maintenance
terminal.
CREM
Customer Remote Loopback
The loopback at HLU-431, List 1D (remote) toward customer (see
Figure 6) initiated from CPE (customer) by either the IOR code, the
HLU-431 front panel Manual Loopback push buttons, or the
maintenance terminal.
ARM
Armed
The HiGain system detected the IR loopback (2 in 5) arming code.
TLOS
Transmit Loss of Signal
(Loopback)
HRU-412 is in a logic loopback state, caused by a loss of its DS1
input from the CI when ENAbled at the HRU-412, List 6 or List 7,
via its TLOS switch option.