150-450-105-02, Revision 02
Installation
HRE-450 List 5
November 4, 1998
9
Figure 6.
Preparing the Wire Pair for Insertion into the Quiet-Front Connector Modules
9
Use a Type 216C (7/16 inch) wrench to rotate each QFCM lug 1/4 turn counterclockwise to open the
connectors.
Figure 7.
Locating the QFCM Connecting Lug
10 Insert the first pair’s Tip and Ring wires into the Wire-Entry holes in the first QFCM, until the wires touch
the ends of the transparent plastic caps.
Do not strip the drop-wire pair insulation.
Do not rotate the QFCM lug more than 1/4 turn or you will cut the wire.
