Section 150-612-102
Revision 03
Page 8
RLEV
0*: Configures the T1 RCV LEVEL to 0 dB.
This sets the T1 output signal level from the
HRU towards the NI to 0 dB. This setting is
recommended when the HRU does not function
as the NID but is connected to an external NID.
It allows the external NID to set the appropriate
NI level.
15: Configures the T1 RCV LEVEL to -15 dB.
This sets the T1 output signal level from the
HRU towards the NI level to -15 dB. This
setting is recommended when the HRU
functions as the NID.
Note that the “ * ” denotes the factory setting.
Figure 5. HRU-612 Loopbacks.