Maintenance
150-231-175-01, Revision 01
20
September 23, 1998
HLU-231 List 7E
Set Date
To set the system date, type the month, day and year in a mm/dd/yy format, then press
. The Update
Remote field displays.
Update the HRU Time and Date
The remote unit date and time is set by using this option. To update the remote, do one of the following:
•
Press
to update the HRU to the same date and time set for the HLU-231 or
•
Press
. (The remote unit is not updated.)
S
YSTEM
S
ETTINGS
The options set from the System Settings screen are the same as the options set through the HLU-231 front panel
Mode and SEL buttons (except for Margin Alarm Threshold and DS0 Blocking, which can only be set at this
screen). Refer to
for a listing of system setting options.
Press
from the Maintenance Terminal Main Menu to open the System Settings screen (
).
Figure 11.
System Settings Screen
When editing entries in the Clock screen and when using the Terminal emulation program in
Windows 3.1, pressing the
key deletes two characters instead of just one.
All time information is lost when power is removed. The last date, however, is retained in
NVRAM and reappears when power is restored.
SYSTEM SETTINGS
TIME: 12:46:06
DATE: 02/02/98 CIRCUIT ID#:
E(Q)UALIZATION:
EXT
SMART-JACK (L)B:
ENABLED
(S)PECIAL LPBK:
GNLB
(P)OWER:
AUTO
(Z)BTSI:
OFF
ES ALARM TH(R)ESH:
NONE
LOOPBACK (T)IMEOUT: 60
(A)LARM:
DISABLED
(D)S1 LINE CODE:
AUTO
(F)RAMING: AUTO
AIS ON (H)DSL LOSW: 2 LOOPS
AIS ON S(M)JK/NREM: ENABLED
MAR(G)IN ALM THRES: 4
DS0 (B)LOCKING: xx - Blocked Channels
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
(E)xit
Enter the letter in parenthesis (X) to change any setting
