5
The power wire to the Indicator can only be connected to one of the Output wires.
Connecting it to both Outputs will only tie the Outputs together causing power to be routed
to both devices no matter which “on” position the switch is switched to.
Illustration C
shows the correct way to connect the Indicator to both Outputs using diodes.
Illustration C
Illustration D
illustrates the proper hookup of wires using an on/off/on switch
when two devices are to be operated and one of the devices is to be on in both positions.
An example might be headlights and taillights. With the switch in the upper position only
the taillights are on and in the lower position the headlights and taillights are on. The
diode, in the illustration, allows this function to take place.
Illustration D