Part 3 - Configuration
63
Network Setup
Refer to the
Menu Use on page 36
for basic
information on using the Setup menus.
General
t
Remote Audio Channel
: Transmits the selected
channel's audio to the remote program. Select
Select
From Client
to stream audio of the channel selected
on the remote program.
Audio skipping and sync issues can occur under poor
network conditions.
t
Enable SSL for Transferring Data
: Applies SSL
(Secure Sockets Layer) protection on remote viewing
and recording data transmissions.
t
If using the SSL feature, it will not be possible to
connect to the NVR from a remote program or a
network keyboard that does not support SSL.
t
Changing the SSL setting temporarily severs all
remote connections to the NVR in order to apply the
change.
t
This product contains content developed by
OpenSSL Project for use in Open SSL Toolkit (http://
www.openssl.org/).
t
WebGuard:
If you wish to use WebGuard, select
WebGuard - Use WebGuard Service. Select WebGuard
- WebGuard Port and choose a port number between
1024 and 65535. The port number can also be entered
using the virtual keyboard. For more information on
WebGuard, refer to the
Part 5 - WebGuard on page
81.
t
Network Bandwidth limit
: Configure the bandwidth
limit.
If you configured t
Network Bandwidth limit
, the
live video may not be displayed smoothly in a remote
program.
