© Sysnext 2011. All rights reserved.
This material is not to be interpreted as a guarantee of earnings and may not be copied, reproducved, modified, published, uploaded,
posted or distributed in any way, without Packshot
Creator
’s prior consent.
Contacts:
Packshot
Creator
/ Sysnext
7, rue Henri Rochefort
75017 Paris – France
T.: +33 (0)1 47 42 66 66
F.: +33 (0)1 47 42 66 67
For more information please contact www.packshot-creator.com
Taking pictures and
creating 360° animations
Troubleshooting
Recommended
installation composition
Once the software has been launched, you can preview your products in real time on
your screen and start taking pictures by using the camera control features (zoom, rotate,
crop, snap, etc.)
For animation creation, click on the 3D button. The 3D Creation Wizard will appear on the
screen. Select Create 3D Animation and follow the onscreen instructions.
See the Packshot
Spin
User Guide for additional information.
If the message “Cannot find 3D Turntable device” appears:
Confirm that the turntable is powered.
Make sure all USB cords are properly connected.
Check that the power switch on the turntable is in the “II” or “ON” position.
Close all active windows then re-launch the software and try again.
If the problem persists, try eliminating any device connected by USB or plug the USB cord into
a different port on your computer then try again.
Illustration :
Packshot
Spin
O9T
