1414141414
Packard Bell EasyNote MX Disassembly Manual
14
2. Disconnect the 2 flat cables and separate the part from the top cover (see
Fig. 22
).
Note:
The touchpad area and the buttons are separate parts: the touchpad area is part of the top cover. To
replace the touchpad area, disconnect all flat cables on the top cover and replace the entire top cover.
Speakers
To remove the speakers, first remove the battery (see
Battery
), the HDD (see
Hard Disk Drive
), the CD-
ROM or DVD drive (see
Optical Disk Drive
), the wireless network card (see
WLAN Card
), the installed
memory (see
Memory
), the CPU (see
Processor
), the keyboard (see
Keyboard
), remove the LCD screen
(see
LCD Screen Assembly
), the main board top cover
up to step 7
(see
Main Board
), and then perform
the following steps:
1. Disconnect the speaker cable from the main board (see
Fig. 19
).
2. Remove the 2 screws on both speakers and remove the speakers.
Fig. 23 Location of speaker assembly screws.
Subwoofer (Optional)
To remove the optional subwoofer, first remove battery (see
Battery
), the HDD (see
Hard Disk Drive
), the
CD-ROM or DVD drive (see
Optical Disk Drive
), the wireless network card (see
WLAN Card
), the
installed memory (see
Memory
), the CPU (see
Processor
), the keyboard (see
Keyboard
), remove the
LCD screen (see
LCD Screen Assembly
), the main board top cover
up to step 7
(see
Main Board
), and
then perform the following steps:
1. Disconnect the subwoofer cable from the main board.
Fig. 24 Disconnecting the subwoofer cable.
