Packard Bell EasyNote SJ Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 28

Packard Bell EasyNote SJ Скачать руководство пользователя страница 18

1717171717

Packard Bell EasyNote SJ Disassembly Manual

17

2. Remove the 2 screws securing the subwoofer and lift it out (see

Fig. 27-B

).

Note:

The subwoofer is optional.

Touchpad Button Board

The touchpad button board is located on the top cover. To remove it, first remove the top cover
(see

Top Cover

), and then perform the following steps:

1. Release the clip securing the flat cable (the clip folds up) and disconnect the flat cable

from the touchpad.

Fig. 28 Removing touchpad button board and cable.

2.

Remove the 2 screws securing the touchpad button board and lift out the board
including the cable (see

Fig. 28

).

Note:

The touchpad is part of the top cover and it cannot be exchanged separately. You cannot remove the flat

cable from the touchpad button board.

Standby Switch

The standby switch works as a soft power switch when the lid is closed; it is located in the top
cover. To remove the standby switch, first remove the top cover (see

Top Cover

), and then

perform the following steps:

1. Remove the screw securing the standby switch.

«
...
16
17
18
19
20
...
»

Содержание EasyNote SJ





























Отзывы:

Нет отзывов