1010101010
Packard Bell EasyNote ME Disassembly Manual
10
Note:
Pay close attention to the DC jack cable after replacing the main board for example. You should tape the
cable firmly to the bottom cover and guide it underneath the optical disk drive connector on the main board.
Otherwise, the optical disk drive will not fit properly when inserting it.
Keyboard
To remove the keyboard, first remove the battery (see
Battery
) and then perform the following steps:
1. Turn the notebook over so the top is facing up and open the LCD completely.
2. Release the cover by prying it up on the left side of the notebook.
Fig. 15 Removing keyboard cover.
3. Tilt the cover from the left to the right and lift it out.
4. Remove the 4 screws securing the keyboard.
Fig. 16 Location of keyboard screws.
5. Tilt the keyboard gently forward (see
Fig. 16
).
