Packard Bell EasyNote DT85, Руководство по обслуживанию

Страница: 116 / 208

CHAPTER 3: Replacing notebook components
110
29
Reconnect the USB board cable by following the instructions in “Replacing
the USB board” on page 96 .
30
Replace the palm rest by following the instructions in “Replacing the palm
rest” on page 87 .
31
Replace the LCD panel assembly by following the instructions in “Replacing
the LCD panel assembly” on page 83 .
32
Reconnect the power button board by following the instructions in “Replacing
the power button board” on page 81 .
33
Reinstall the keyboard cover by following the instructions in “Replacing the
keyboard cover” procedure on page 79 .
34
Reinstall the keyboard by following the instructions in “Replacing the
keyboard” on page 77 .
35
Close the LCD panel and turn the notebook over so the base is facing up.
36
If the system comes with a VGA board, replace the VGA board by following
the instructions in
“Replacing the VGA board (for discrete models)” on
page 75 .
37
Replace the CPU by following the instructions in “Replacing the CPU” on
page 73 .
38
Replace the thermal module by following the instructions in “Replacing the
thermal module” on page 70 .
39
Reinstall the optical drive by following the instructions in “Replacing the
optical drive” on page 67 .
40
If the system comes with a hard drive 2, reinstall the hard drive 2 by following
the instruction in
“Replacing the hard drive 2” on page 64 .
41
Reinstall the hard drive by following the instructions in “Replacing the hard
drive 1” on page 61 .
42
Reinstall the wireless card by following the instructions in “Replacing the
wireless card” on page 58 .
43
Reconnect the wireless antenna cables to the wireless card.
44
Reinstall the memory module by following the instructions in “Adding or
replacing memory modules” on page 57 .
45
Replace the bay cover, then tighten the cover screws.
46
Reinstall the battery.