Easy DVD Recorder User's Guide
3
II.
Precautions
Safety and operating precautions
Power requirement for this device is AC 220-240V, 50/60 Hz. Please ensure the power
supply to your home is in this range.
The temperature of the top cover and rear panel of the recorder may be high after playing
for a long period of time. This is normal.
When the recorder is not in use, please remove the disc and turn the power off.
Malfunctions may occur if the recorder has not been used for a long period of time. For
best results, turn it on occasionally.
Some kinds of discs may cause the unit to hang or freeze. Please restart the unit when
this occurs. Wait at least 10 seconds before restarting to extend the life of the recorder.
This DVD recorder is a device of high technology and high precision. The image quality
may be impaired when the laser head or the disc driving parts are dirty or damaged.
Do not use the
Easy DVD Recorder
where condensation may form easily, as this may
damage the disc and inner parts of the recorder.
Place the device in a location with adequate ventilation to prevent internal heat build up.
Use a soft and dry cloth for cleaning. For the stains that cannot be removed easily, apply
some diluted neutral detergent to a cloth, wring the cloth dry and wipe the stains away,
then use a dry cloth to clean. Do not use any solvents such as thinner or benzene; as this
may damage the
Easy DVD Recorder
.
Disc care
Periodically clean the disc to remove any dust or fingerprints. Use a soft, scratch-free
cloth or a commercial disc cleaner.
To keep the disc free of fingerprints, hold the disc with your fingers on the outer edge or
with a finger in the inner circle and a finger on the outer edge.
Always return the disc to its protective case or sleeve when you have finished using it.
Keep the disc tray closed whenever you are not using the drive.