DS8238 Manual (086-003006-041)
26
27
You can only specify the DPOF of the internal memory by transferring
the images to a blank SD /MMC Card via a Secure Digital card / Multi-
Media card reader (sold separately).
DPOF of Selected Images
1. When Select Image(s) is selected, the OSD
displays up to nine thumbnail images similar to
the Multi-Frame Review setting (
p.24).
Use
to navigate.
2
.
Select an image to specify the DPOF and
press OK. Press or to set the number
of prints for the selected image (up to a
maximum of 6 copies). When done, press
OK again. Repeat this step to select more
images for printing or change the previously
specified numbers.
3. Follow the rest of the on-screen options to confirm the DPOF setting.
DPOF of All Images
1. When “All Images” is selected, all images will be set to the same specified
printing number.
2. Press or to set the number of prints of all stored images in the SD
card, for up to a maximum of 9 copies.
3. Follow the rest of the options to confirm the DPOF setting.
Slide (Slideshow)
You can play back all the images and movies in
a slideshow format. The interval between images
can be specified.
During the slideshow, press MENU to stop.
From here, you may choose to continue or
exit the current slideshow.
Slideshow Options
Settings
Descriptions
Start
Start Slideshow according to
the specified Interval and
Repeat options.
Interval
Specifies the amount of time
the camera will display an image
before moving on to the next
image. The options are 3 sec.,
5 sec., and 10 sec.
Repeat
When set to On, the slideshow
immediately replays when the
final image is displayed.
CONNECTING TO EXTERNAL DEVICES
USING A TRIPOD WITH THE CAMERA
You can secure your digital camera to a tripod to prevent camera shakes. To install,
screw the tripod to the Tripod Hole (
p.3).
CONNECTING TO A TV
You can playback the images and movies you have recorded on your TV. Connect
your digital camera to the TV via the video/audio cable included in the camera’s gift box.
Be sure to adjust the TV Out setting (
p.14) to correspond with your
country’s system (PAL or NTSC) before connecting the camera to the TV.
Caution: Turn off the TV and digital camera before connecting the video/audio cable.
1. Plug the video/audio cable into the Video/Audio Socket of the camera (
p.3).
2. Connect the cable’s yellow connector to the yellow AV input terminal of your
TV. Likewise, connect the white connector to the TV’s white terminal. Refer to
your TV’s manual for more information.
3. Turn the TV and digital camera on. Make sure to switch the TV to the
appropriate AV channel display.
The OSD is automatically off when the camera is connected to a TV.
Use an AC Adapter if you intend to connect the camera to a TV for a long
period of time.
CONNECTING TO A WINDOWS-BASED PC
Use the USB cable included to connect to your Windows PC. This enables you to
upload, download, edit, and playback pictures and movies onto your PC. However,
the software must be installed first.
•
Pentium 66MHz
•
16-bit colour display at 800x600
•
64MBytes RAM
•
USB 1.1 interface
•
350MBytes Hard disk space
•
Windows 98/98SE/ME/2000/XP
•
CD-ROM drive
1. Insert the CD into your CD-ROM drive. The installation will start automatically.
If the “autorun” feature is disabled on your PC, start the installation by
running [x:\setup.exe] where “x:” is the drive letter of the CD-ROM drive.
Pre-Installation Checklist
Installing Drivers and Software
0
0
1
0
0
3
0
0
4
Set
Next
MENU
OK
1/1
Playback
Setup
Exit
OK
MENU
Delete
Protect
DPOF
Slide
OK
Slide
Exit
OK
MENU
5s
Off
Start
Interval
Repeat
OK
Содержание DSC220
Страница 1: ...DSC220 ...
