DS8238 Manual (086-003006-041)
1) Interval
Here, you can set the interval between each successive automatic shot.
For example, you can choose to have the camera automatically take photos
every 5 minutes, or even every 2 days.
The number of shots taken using the Scheduled Shot is entirely dependent
on the time Interval specified, as well as the chosen Start and End times.
For example, if you chose the Start and End times to be 2 hours apart,
and the interval is set a 15 minutes per shot, the camera will then take a
total of 8 shots.
2) Start
You can choose the date and time at which the camera starts to take automatic
photos. The Start time cannot be earlier than the current time.
3) End
Finally, you can choose the date and time at which the camera stop taking
the automatic photos. The End time cannot be earlier than the current time.
If the Start time specified is later than the End time, the camera will
make warning beeps if you try to enable the function. You will have to
adjust the settings again.
To cancel the Scheduled Shot, switch the Mode Dial to any other modes.
The OSD screen will display, “Schedule Shot in progress. Do you want
to stop it?”. Press OK to stop the function, or MENU to continue.
SHOOTING MOVIES
BASIC FUNCTIONS
The Movie Mode enables you to take moving images. The length of the movie that
can be taken depends on the amount of memory available within your camera’s
current memory storage.
Movie Mode On-Screen Display
20
21
Movie Mode Functions
Function
Page
Description
Toggling OSD Information
p.8
Identical procedures to Camera Modes
Zooming
p.10
Identical procedures to Camera Modes
Begin Recording Movie
N/A
Press the Shutter Release Button
Stop Recording Movie
N/A
Press the Shutter Release Button again
after recording has started.
MOVIE MENU
Press
MENU
to access the Movie Menu.
Movies Settings and Options
The options underlined and in italics are initial defaults.
Settings
Page
Options
Mic.
p.21
Off / On
White Balance
p.17
Auto / Sun light/ Shade/ Yellow F.L. (Fluorescent
Lamp) / White F.L. (Fluorescent Lamp) / Tungsten
ISO
p.18
Auto / 100 / 200 / 400
EV
p.19
+2.0 / + 1.7 / +1.3 / +1.0 / +0.7 / +0.3 / 0.0 / -0.3/
-0.7 / -1.0 / -1.3 / -1.7 / -2.0
Mic. (Microphone)
You can enable or disable audio recording while
shooting a movie. The microphone icon (same as
Audio Tag icon) is displayed on the Status LCD
and OSD.
PLAYBACK FUNCTIONS
In Playback Mode, you can review the images and movies stored within your current
active storage memory. The last image or movie taken is displayed on the OSD in Playback
Mode. Use
and press or to view through the images and movies taken.
If the Secure Digital card / Multi-Media Card is installed, the Playback Mode
will only show the images and movies stored on the card. To access the data
stored within the internal memory, the SD card must first be removed ( p.6).
Movie Mode
(
p.21)
Total Available
Time for Recording
Current Elapsed
Recording Time
(in hh:mm:ss)
ISO (
p.18)
White Balance
(
p.17)
Zoom Level
(
p.10)
Macro Mode
(
p.9)
World Time
(
p.13)
Current Time
(
p.13)
EV (
p.19)
Battery Level
Indicator (
p.4)
Audio Tag
(
p.19)
Memory Type
Current Date (
p.12)
1/1
Movie
Setup
Exit
OK
MENU
Mic
White Bal
ISO
EV
OK
On
WB
AUTO
ISO
AUTO
0.0
Содержание DSC220
Страница 1: ...DSC220 ...
