8
AutoClean
Ionizer
LED Light
Control Board
Red
Red
Black
Brown
Blue
Yellow / Green
3 Pin Plug
On / Of
f
Operational
Panel
5 PIN
Black
White
Black
Orange (zero wire)
White (Booster)
Yellow
Red
Capacitor
Motor
Grey
(High Speed)
Black
(Mid Speed)
Green
(Low Speed)
Blue
(Air Changing)
Electrical Diagram
Recomended checking/solution
After checking the range hood still not working, please contact customer care/technician : 03-7805 7725
(after sales service department) for checking appointment.
If you found any unsual issue, please stop using and unplug the power socket, and check according to the following
information.
Problems
All machine function
are not function
Motor and light
not working
Motor working but the
light did not working
Motor did not working
but the light working
The smoke can not
perform effective
Range hood vibration
Plug in the outlet not connected
Pls switch on the plug
Plug has no power
Plug has no power
The light not turn on
Motor maybe broken
Overheating protection of motor
Circuit/capasitor board was broken
Control board was broken
The clearance between range hood
and cooking hob is to high
Speed slow
Too much air cant go through
or pressurized tightly
Air block
Rang hood did not install correctly
The body of the hood is not level
The blower wheel is spoilt
Light may broken
Switch may broken
Lighting cable is spoilt/melt
Pls call the electrician to check & repair
Main circuit board fuse broken
Plug in the outlet not connected
Pls call the electrician to check & repair
Check the user manual to turn on the light
Pls replace the LED light
Pls replace the control board or switch
Pls call technician reconnect the lighting cable
Pls call office to check, may need replace the motor
Pls replace the motor
Pls replace the circuit/capasitor board
Pls replace the control board
Pls follow suggest installation guide
clearance of installation
Pls adjust the max speed
Pls closed part of windows & doors
Pls check the ducting any interuption or leakage
Pls re-install the hood
Pls replace the blower fan
Mechanical noise
The blower fan has spoilt caused the jiggly
sound and blower caused to concuss fan
Foreign object fell into the ducting
Air/wind outlet is not open
Pls replace the blower fan
Pls remove the foreign object from the ducting
Adjust the wind outlet to the normal state
Pls check if plugs in or not
Pls replace the circuit board
Reason
Check/Solution
Check List
