background image

9

Remove Oil Cup

*Reminder: To operate AutoClean function once a

week to wash oilly grease from the fan. Please

take out oil cup for wash, dry & fix back. 

*Reminder: Please remove plug first, to continue

internal fan take out for cleaning.

Please wear glove to proceed further. Carefully

take out S/Steel flue.

*Reminder: Unscrew first, to remove outer motor

casing. Remember to put back all screw after

cleaning.

*Reminder: Remove Oil chamber first for cleaning.

Please do not use water pipe to spray direct into

fan chamber.

You may call customer service to fix cleaning service appointment subject to current cooker hood cleaning charges.

*Reminder: Remove internal fan for cleaning,

unscrew, take out the fan to soak with mild

soap water for 30 minutes. To wash & brush the fan

GENTLY to remove the grease. Clean & Dry properly

the inner fan before fix back.

*Reminder: Remove 2 screw (outer baffle filter),

follow by 4 screw (inner baffle filter),take out baffle

filter for easy cleaning.

*Reminder: Remove baffle filter, Wash, Dry & Fix back 

accordingly. 

Baffle filter must always attach with cooker

hood for safety purpose.

Remove 2 screw

Remove Baffle Filter

Remove

S/Steel Flue

Remove

Outer Motor

Casing

Remove

Oil Chamber

Remove

Internal

Fan for

Cleaning

Maintenance

MAINTENANCE

ATTENTION! Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the 

connector and removing the connector fuse.

Or if the appliance has been connected through a plug and socket, then the plug must be removed from the socket.

Cleaning

-

Clean using the cloth dampened with neutral liquid detergent. Do not use abrasive products. 

DO NOT USE ALCOHOL!

 

The cooker hood should be cleaned regularly (at least once a week (AutoClean) baffle filter once 2 weeks) internally and externally. Clean

WARNING:

Therefore, we recommend observing these instructions.

to observe the above safety recommendations.

Baffle filter

Traps cooking grease particles.

The grease 

 must be cleaned once a month using non aggressive detergents, either by hand or in the dishwasher, which must be 

To remove the baffle filter, remove oil cup then remove screw underneath.

Replacing lamps

Disconnect the appliance from the electricity.

Warning!

 Prior to touching the light bulbs ensure they are cooled down.

The hood is equipped with a lighting system based on LED technology.

The LEDs guarantee an optimum lighting, a duration up to 10 times as long as the traditional lamps and allow to save 90% electrical energy. 

For replacement, contact the technical service.

Step by step easy cleaning baffle filter (every once a month)

Step by step easy cleaning internal fan (at least once a year) to maintain optimum performance

Содержание AutoClean AC7 Mars













Отзывы: