Pacific TruSteam SC9830AS, Инструкция по эксплуатации

Страница: 34 / 68

The unit turns on by
itself.
Remote control may be paired
incorrectly.
Resynchronize the remote control to
connect to a different channel
Someone is controlling the hood via
the Zephyr Connect app.
Determine who is controlling the hood with
the app.
e r a e l d n a h e h t n i s p il c l a t e m e h t e r u s e k a M . e s o o l s i r e tl i F . g n it a r b i v s i r e tl fi h s e M
not stuck or replace the mesh filter.
Spring clip is broken on the filter.
filter latch. Replace filter if needed.
RF Remote control does
not work.
. v 2 1 3 2 A e p y t h ti w y r e t t a b e c a l p e R . d a e d s i y r e t t a B
Poor communication with the hood.
RF Remote lost communication with
the hood.
Reset hood and remote by switching power
Place remote on counter top near the hood
off at the circuit breaker for 5 minutes.
and switch the circuit breaker back on.
Blue antenna wire is not extended.
light panel.
The range hood and
user’s device won’t pair
via Bluetooth®.
The user’s phone does not have
Bluetooth® enabled.
Enable Bluetooth® on the user’s phone.
The user’s phone may be out of
range.
Move closer towards the range hood.
User hasn’t inputted the Bluetooth®
code to successfully pair.
Enter the pairing code, 123456.
Range hood is not in Bluetooth®
pairing mode.
Hold Fan Down and Lights simultaneously
for 5 seconds to put the hood into pairing
There are multiple errors preventing
the user’s phone from pairing with
the range hood.
Restart the user’s phone and try again.
s n o i t u l o S e s u a C e l b i s s o P m e l b o r P e l b i s s o P
32 www.2pacific.com
Troubleshooting
Uninstall and re-install filter. Push up on
Remote control must be within 15 ft of hood.
Extend the blue antenna wire behind the
mode.
The range hood won’t
connect to Wi-Fi.
The user’s router or modem is turned Turn on the router or modem.
The user’s router is connected to a 5
GHz wireless frequency.
off.
Connect to the 2.4 GHz band and attempt
to reconnect.
The user’s coaxial cables are loose. Tigh ten the coaxial cables connecting to the
router or modem.
The Wi-Fi on the user’s phone is
disabled.
Enable Wi-Fi on the phone.
User is connecting to the wrong Wi-Fi
network.
Verify that the correct Wi-Fi network is
being connected to. The default Wi-Fi
network name/SSID can be found on the
router.
The range hood is not in range of the
Wi-Fi connection.
Move the router and modem closer to the
range hood to increase connection strength.
There are obstacles obstructing the
Wi-Fi signal strength.
Move the router and modem closer to
the range hood or move objects that are
directly blocking the pathway to the range
hood. Walls may reduce signal strength.