background image

Grounding Instructions

This machine must be grounded.  If it should malfunction or break down, grounding provides a path of least resistance for 

electric current to reduce the risk of electric shock.  This machine is equipped with a cord having an equipment-grounding 

conductor and grounding plug.  The plug must be inserted into an appropriate outlet that is properly installed and grounded 

in accordance with all local codes and ordinances.

WARNING

 - Improper connection of the equipment-grounding conductor can result in a risk of electric shock.  

Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded.  Do 

not modify the plug provided with the machine - if it will not fit the outlet, have a proper outlet installed by a qualified 

electrician.

This machine is for use on a nominal 120-volt circuit, and has a ground-

ed plug that looks like the plug illustrated in figure A.  A temporary 

adapter that looks like the adapter illustrated in figures B and C may be 

used to connect this plug to a 2-pole receptacle as shown in figure B 

if a properly grounded outlet is not available.  The temporary adapter 

should be used only until a properly grounded outlet (figure A) can be 

installed by a qualified electrician.  The green colored rigid ear, lug, or 

the like extending from the adapter must be connected to a perma-

nent ground such as a properly grounded outlet box cover.  Whenever 

the adapter is used, it must be held in place by a metal screw.

NOTE: In Canada, the use of a temporary adapter is not permitted by 

the Canadian Electrical Code

EXTENSION CORDS

Use only three-wire 12/3 or larger gauge approved extension cords 

that have three-prong grounding type plugs and three-pole receptacles 

that accept the appliance’s plug.  Replace or repair any damaged cords 

or plugs.

When servicing, refer to authorized person only.  Use only identical 
replacement parts.

NOTE:

  Do not use adapters shown in 

figures B & C in Canada

IMPORTANT SAFETY INSTRUCTIONS

2

Содержание SCE-4













Отзывы: