Pacific PA-315, Руководство пользователя

Страница: 13 / 14

<<<OTHERS>>> Others
You can set those items below on this OTHERS page.
■ DNR
■ MOTION DETECT
■ GAMMA
■ SETUP LEVEL
■ SERIAL Com ID
■ COLOR ADJ.
■ INITIAL
1. DNR*
​ Select level of DNR. Select [LOW/MIDDLE/HIGH/AUTO/OFF] by key.
※ ※
​ ​
It adjusts DNR level automatically when you set as AUTO by AGC
​ ​
[
​
ON/OFF
​ ​
].
2.MOTION DETECT
​
― Motion Detect function
Motion detect function
Motion Detect
It shows a box-shaped mark in yellow on the upper left of screen when it detects people, car etc on
screen. 4 areas are available to set. In addition, you can set a detection area with mixing these 4
areas.
To see each area, switch-over [ON/OFF] by DISPLAY. Change those area position by
TOP/BOTTOM/LEFT/ RIGHT by key.
It positions upper and left side of the monitor (coordination:0,0,0,0
）
as images shown.
3. GAMMA ​ ​
Use the setting [0.35-0.70] on normal operation.
In case that there is no necessary for Gamma correction such as image processing, use the
setting [1.0]
PACIFIC CORPORATION UK
www.pacific-cameras.co.uk