AUTO ON Setting
2. DAY/NIGHT
Switch-over Day/Night function Select from [AUTO/DAY/ NIGHT/EXT].
At NIGHT mode, it sets not only to switch over into monochrome also to cut a burst signal in
order to improve resolution.
Also it sets to switch over to infrared filter to synchronize DAY/NIGHT setting at a D/N unit
model.
AUTO
It switches over automatically to DAY/NIGHT based on the AGC level. The AGC level can be
selected as followed.
■
AGC Increase
⇒
⇒
to NIGHT mode
：
：
05~20 level
（
（
Default : 18
）
）
■
AGC Decrease
⇒
⇒
to DAY mode
：
：
00~15 level
（
（
Default: 02
）
）
CONTINUOUS ―
Duration time of DAY/NIGHT
CONTINUOUS is a function to set a duration time from Day to Night or vice versa. Adjust key.
Once it reaches to the value you set, it switches between Day and Night within the time you set
not to move back to threshold.
NIGHT
Sub menu
It cuts a burst signal in order to improve resolution at a night mode (monochrome mode) by sub
menu.
EXT
It switches over [DAY/NIGHT] by controlling terminal level by a switch or driver IC, using the 7
th
pin of OSD key connector (CN5). FIY, this function cannot be used while OSD menu is shown
on screen.
3.
H-MIRROR ― Horizontal Reversal Function
It is used when you want to flip mirror image to horizontal axis. Switch over [ON/OFF] by key.
PACIFIC CORPORATION UK
www.pacific-cameras.co.uk
