Pacific Ventilation BEC 150HP, Руководство пользователя

Страница: 4 / 16

4
Pacific Ventilation
The connection to the supply mains must be made through a means of disconnection, which is incorporated in the
fixed wiring in accordance with the wiring rules, and has a contact separation in all poles that allows for full
disconnection under over voltage category III conditions.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons
in order to avoid a safety hazard.
CAUTION: In order to avoid a safety hazard due to inadvertent resetting of the thermal cut-out, this appliance must
not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
Ensure that the appliance is switched off from the supply mains before removing the guard.
WARNING: If unusual oscillating movements is observed, immediately stop using the appliance and contact the
manufacturer, its service agent or suitably qualified persons.
The replacement of parts of the safety suspension system device shall be performed by the manufacturer, its service
agent or suitably qualified persons.
Fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a sufficient strength to
withstand 4 times the weight of the appliance.
The mounting of the suspension system shall be performed by the manufacturer, its service agent or suitably
qualified persons.
The appliance is to be installed so that the blades are more than 2.3m above the floor.
Precautions must be taken to avoid the back-flow of gases into the room from the open flue of gas or
other fuel-burning appliances.
The product must be disposed separately at the end of its service life.
Do not dispose the unit as unsorted domestic waste.