Quick Guide
10
1.2.4
RFC 2516 Routed Mode (PPPoE)
1. Beside ATM Interface, you can setup up to 8(0~7) interface. The default
interface number is 0.
2. Beside Operation Mode, please choose Yes to enable this interface.
3. Beside Encapsulation, use the drop down menu and select PPPoE LLC. .
If your encapsulation is VC multiplexing, choose PPPoE VC-Mux.
4. Beside VPI, enter in a value (please consult your ISP for your VPI.
Factory default is 0).
5.
Beside VCI, enter in a value (please consult your ISP for your VCI.
Factory default is 35).
6.
Beside Bridge, use the drop down menu and select Disabled.
7. Beside IGMP, use the drop down menu and select Disabled to accept
multicast.
8. Beside Use DHCP, place the black dot beside Disable.
9. Beside Default Route, use the drop down menu and select Enabled.
10. Besdie Username(case sensitive), enter in your User Name and your
may also need to enter in your domain name.
11. Beside Password(case sensitive), enter in your password.
12. Beside Use DNS, place the black dot beside Enable.
13. DO NOT MAKE ANY OTHER CHANGES.
14. Click on the Submit button.
15.
Click the Admin tab, and then click Commit&Reboot in the task bar.
16. Click
to save changes to permanent storage.
17.
Move on section 2.1-ADSL Connection.
1.2.5 RFC 2364 Routed Mode (PPPoA)
1. Beside ATM Interface, you can setup up to 8(0~7) interface. The default
interface number is 0.
2. Beside Operation Mode, please choose Yes to enable this interface.
3.
Beside Encapsulation, use the drop down menu and select PPPoA
LLC. . If your encapsulation is VC multiplexing, choose PPPoA
VC-Mux.
4.
Beside VPI, enter in a value (please consult your ISP for your VPI.
Factory default is 0).
5.
Beside VCI, enter in a value (please consult your ISP for your VCI.
Factory default is 35).
6. Beside Bridge, use the drop down menu and select Disabled.