Danaher Motion Pacific Scientific
Getting Started
M-SD-7AC-01 Rev 1
1
1. GETTING STARTED
Warning
Read this reference guide before you apply power to
the drive. Miswiring of the drive may result in
damage to the unit voiding the warranty. Improper
grounding of the drive may cause serious injury to
the operator.
Only qualified personnel are permitted to transport, assemble,
commission, and maintain this equipment. Properly qualified personnel
are persons who are familiar with the transport, assembly, installation,
commissioning and operation of motors, and who have the appropriate
qualifications for their jobs.
Read all available documentation before assembling and using. Incorrect
handling of products in this manual can result in injury and damage to
persons and machinery. Strictly adhere to the technical information
regarding installation requirements.
Keep all covers and cabinet doors shut during operation.
Be aware that during operation, the product has electrically charged
components and hot surfaces. Control and power cables can carry a
high voltage, even when the motor is not rotating.
Never disconnect or connect the product while the power source is
energized.
After removing the power source from the equipment, wait at least 2
minutes before touching or disconnecting sections of the equipment
that normally carry electrical charges (e.g., capacitors, contacts,
screw connections). To be safe, measure the electrical contact points
with a meter before touching the equipment.
1.1. U
NPACKING AND
I
NSPECTING
Open the box and remove all the contents. Check to ensure there is no
visible damage to any of the equipment.
Use proper procedures when handling electronic
components to avoid damage to equipment.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
