5. Insert the connector of the light board into the inlet on the front
panel of UV transilluminator . The system will identify which light
board is inserted and will automatically show the light source icon
on the screen.
6. Operate the further image process work.
How to change the illuminator:
1. Turn system power off.
2. Slide out the illuminator from the chamber
3. Unplug the power cord (and connector, if any) on the right side of the back of the illuminator
4. Slide the illuminator out of the chamber to the end.
5. Find the plastic pad on the track underneath the illuminator, one plastic pad per track.
6. Hold the illuminator and press the plastic pad per hand and slightly slide the illuminator out of
the track.
7. For the new illuminator installation, find the plastic pads on the track underneath the new
illuminator. Hold the illuminator, press the plastic pads, and align the tracks of the illuminator
to push the illuminator gently into tracks. The illuminator is on the right track when a “click”
sound is heard.
8. Connect the power cord (and connector, if any).
9. Turn on the power once again.
Inlet for light board
14